PORTER DAYBED
Model #1870-010 / 1870-010A Side Panels
Model #1870-020 / 1870-020A Back Panel
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
CARE & MAINTENANCE:
The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all bolts, screws and nuts are securely tightened.
Date: 10-28-2015
Page 1 of 1
HARDWARE LIST
A (8) 30mm Wood Screws
B (12) 1/4” x 50mm Allen Bolts
C (12) 1/4” Flat Washers
D (12) 1/4” Spring Washers
E (1) 1/4” Allen Wrench
PARTS LIST
F (1) Back Panel
G (2) Side Panels
H (1) Front Rail
I (1) Rear Rail
J (14) Plywood Slats
QTY
PART
8
A
12
C
HARDWARE
QTY
PART
HARDWARE
12
12
B
D
1
E
*
Trundle Sold Separately
Model #1719-030 Trundle Panel
STEP 1
Begin assembly by attaching the Back Panel (F) to the back of each Side
Panel (G) by aligning the holes and securing with 2 Allen Bolts (B), 2
Spring Washers (D) & 2 Flat Washers (C) from the backside per each end.
Do not fully tighten bolts for this step.
STEP 2
Next attach the Rear Rail (I) to the back of
each Side Panel (G) by aligning the holes and
securing with 2 Allen Bolts (B), 2 Spring
Washers (D) and 2 Flat Washers (C) per
each end. Do not fully tighten bolts for
this step.
STEP 3
Attach the Front Rail (H) to the inside of
each Side Rail (G) in the front by
aligning the holes and securing with 2
Allen Bolts (B), 2 Spring Washers (D)
and 2 Flat Washers (C) per each end.
Tighten all bolts from Steps 1 through 3 using
the Allen Wrench (E) that has been provided.
A
B
B
B
B
B
B
C
C
C
C
C
C
D
D
D
D
D
D
FIGURE 1
STEP 4
Insert both ends of each Plywood
Slat (J) onto the Front and Rear
Rails (H & I) and secure with 8
Wood Screws (A). See
Figure 1
.
The assembly is now complete.
A
A
A
A
A
A A
A
A
A
A
A
A
A
A
A
A
A
F
F
J
G
G
G
G
H
H
I
Note: Wood Block is on
the top side of rails for
slat spacing.
