background image

To help prevent serious or fatal injuries from entrapment or falls:

Follow the information on the warnings appearing on the upper bunk end structure and on the carton. Do not remove

warning label from bed.

Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment

or falls.

Use only mattress which is 74-75 inches long and 37-1/2 - 38-1/2 inches wide on upper and lower bunk. Ensure thickness

of mattress and foundation combined does not exceed 8 inches and that mattress surface is at least 5 inches (127 mm)

below the upper edge of guardrails.

Do not allow children under 6 years of age to use the upper bunk.

Prohibit more than one person on the upper bunk at all times.

Periodically check and ensure that the guardrail, ladder, and other components are in their proper position, free from

damage, and that all connectors are tight.

Do not allow horseplay on or under the bed and prohibit jumping on the bed.

Always use the ladder for entering and leaving the upper bunk.

Do not use substitute parts. 

Contact the manufacturer or dealer for replacement parts.

Use of a night light may provide added safety precaution for a child using the upper bunk.

Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to the wall, the guardrail

that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and wall.

The use of water or sleep flotation mattresses is prohibited.

STRANGULATON HAZARD

 - Never attach or hang items to any part of the bunk bed that are not designed for use with the bed;

for example: but not limited to - hooks, belts, and jump ropes.

!    IMPORTANT    !

Keep these instructions for future reference.

Содержание 1178-310









Отзывы: