Hillrom Welch Allyn Connex ProBP 3400, Руководство по обслуживанию, Страница: 9 / 64

Safety
All users of this device must read and understand all safety information presented in this manual
before using or repairing the device.
United States federal law restricts this device to sale, distribution, or use by or on the order of a
licensed medical practitioner.
Warnings and cautions
WARNING
Fire and explosion hazard. Do not operate the device in the presence
of a flammable anesthetic mixture with air, oxygen, or nitrous oxide; in oxygen-
enriched environments; or in any other potentially explosive environment.
WARNING
The device might not function properly if dropped or damaged. Do
not use the device if you notice any signs of damage. Qualified service personnel
must check any device that is dropped or damaged for proper operation before
putting the device back into use.
WARNING
For proper patient electrical isolation and battery charging, use only
the provided external power supply to charge the device.
WARNING
Electric shock hazard. Use the USB connector only to connect to
devices complying with IEC 60601-1 or other IEC standards as appropriate to the
device. The user is responsible for verifying that the system complies with the
requirements of the system standard IEC 60601-1-1 if additional devices are
connected to the ProBP 3400.
WARNING
Inaccurate measurement risk. Dust and particle ingress can affect the
accuracy of blood pressure measurements. Use the device in clean environments
to ensure measurement accuracy. If you notice dust or lint accumulation on the
blood pressure port, have the device inspected and cleaned by a qualified service
technician.
WARNING
Electric shock hazard. Before cleaning the device, disconnect the
power cord from the power source and the device. Ensure power transformer and
wall plug assembly are dry before plugging into an outlet.
WARNING
Take care to prevent water or other fluid from entering any connectors
on the device, power transformer, and wall plug. Should this occur, dry the
connectors with warm air. Check the accuracy of all operating functions.
5