Hillrom Breathe LIFE2000 Скачать руководство пользователя страница 38

Страница: 38 / 82

VENTILATION SETTINGS

“INCOMPATIBLE SETTINGS” MESSAGE

If the selected Activity Button represents a prescription that is not available, this

message will appear on the touch screen. If therapy had already started with a

different Activity Button, the ventilator will continue delivering therapy using the

prescription represented by the previous Activity Button.
Touch

and choose another active Activity Button to change the currently-

ventilating prescription.

“THIS PRESCRIPTION SETTING IS NOT ACTIVE” MESSAGE

If the selected Activity Button represents a prescription that is not available, this

message will appear on the touch screen. If therapy had already started with a

different Activity Button, the ventilator will continue delivering therapy using the

prescription represented by the previous Activity Button.
Touch

and choose another active Activity Button to change the currently-

ventilating prescription.

“CONNECT OXYGEN SOURCE” OR “DISCONNECT OXYGEN SOURCE” MESSAGE

After powering on, or during therapy when selecting an Activity Button with a

different source gas, a message will appear as a reminder to connect or

disconnect oxygen as appropriate.
After connecting or disconnecting oxygen, touch

to begin ventilating using

the prescription represented by the new Activity Button.
For more information, see "Selecting the Source Gas" on page 66.

10:11a, Fri

Jun 12, 2015

Incompatible Settings!

Adjust Settings

This Prescription

Setting is not active.

10:11a, Fri

Jun 12, 2015

Please connect to

Oxygen source.

10:11a, Fri

Jun 12, 2015

Values displayed on the screen are for

illustrative purposes only.

Values displayed on the screen are for

illustrative purposes only.

Source gas is oxygen

Stand-Alone

Configuration

with an oxygen cylinder

(or a wall oxygen pressure source)

Source gas is air

Stationary

Configuration

Extended Range Configuration

CHOOSING AN ACTIVITY BUTTON (PATIENT SELECTABLE) TO BEGIN VENTILATION

When the ventilator is first powered on, you must select an Activity Button to begin ventilation. The three Activity

Buttons on the ventilator are programmed to correspond to up to three different prescriptions as directed by a

physician.

High Activity Button

Medium Activity Button

Low Activity Button

Choose an Activity Button appropriate for the patient’s needs. The selection can be changed by the patient at any

time, if set and activated by a clinician.

NOTE:

One, two, or three Activity Buttons may be available, as directed by a physician. For more information, see

"Prescription Settings" on page 53.

Ensure that the ventilator is powered on.

Ensure a pressure source (the compressor, an oxygen cylinder, or an oxygen wall source) is connected to

the ventilator and turned on.

Press and hold an Activity Button until you hear a tone that

indicates it is active. The touch screen will display the

Home

Screen

and the ventilator will begin delivering therapy.

Confirm the selected

Activity Icon

is displayed at the bottom of the touch

screen and the icon and volume are displayed at the top of the screen.

(The

High

Activity Icon

is shown for illustrative purposes here.) The

ventilator will begin ventilating using the chosen prescription parameters for

the next breath.

NOTE:

The currently-ventilating

Activity Icon

and volume are displayed at

the top of all screens unless you are in the Clinician’s Menu.

20.0

7.5

500 ml

Air LPM

PIP cmH

Breath/min

10:11a, Fri

Jun 12, 2015

Values displayed on the screen are for

illustrative purposes only.

Содержание Breathe LIFE2000



















































































Результаты поиска

Содержание Breathe LIFE2000

Отзывы:

Бренды по названию

Популярные бренды

Hillrom Breathe LIFE2000, Инструкция по эксплуатации

Результаты поиска

Содержание Breathe LIFE2000

Отзывы:

Бренды по названию

Популярные бренды