manualshive.com logo in svg

Hillrom AC500920K, Инструкция по эксплуатации, Страница: 72 / 90

Поделиться
Скачать
Hillrom AC500920K Скачать руководство пользователя страница 72

User Interface

72

80028681_002_C – 774259 – 2021-09-01

6.6.2

Check-List

In the side menu, press the 

 icon to access the Check-List 

screens. The Check-List is only activated after a patient has been 
selected.

In section [A], it is possible to manage the surgical procedure by 
following a sequence of questions and instructions, as defined by 
the World Health Organisation as default, regarding each stage of 

the surgical procedure. Press the 

 icon to scroll through the 

questions.

The instructions relate to the entire procedure. It will thus be 
possible to leave this section and return to it to check the 
instructions relating to the current state of the surgical activity. It 
will always be possible to view the entry status of the Check-List via 
the progress bar in the Patient Info section.

Once entry is complete, a window will open for the operator to 
enter Notes.

A

Содержание AC500920K



























































































Отзывы:

Нет отзывов