Hillrom AC500920K Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 90

Hillrom AC500920K Скачать руководство пользователя страница 53

User Interface

80028681_002_C – 774259 – 2021-09-01

53

6.4.1

Image data post-processing

By using locally stored data, it is possible to:

–

create video sequences from screenshots saved during the
operation (MATS - Movie Around The Snap),

–

create still images generated from previously recorded video,

–

create annotations on video clips or text information on
images,

–

add annotations to videos and images captured.

6.4.2

Selecting the signals to be recorded

Drag the source of which you wish to record a video or capture
snapshots in the Recording Channel box where you get a Live
Preview of the signal and the basic and advanced recording
functions will be enabled.

The following icons are available in the Recording Channel
window:

Icon

Function

Makes it possible to start/stop recording of the
displayed signal.

If the icon is grey, this indicates that the function is not
active. To activate the function, it is necessary to select
a patient from the list (refer to the paragraph “Selecting
a patient in the list”).

Makes it possible to create snapshots of the video
source stream.

Makes it possible to start/stop video signal streaming.

Makes it possible to start recording:

–

1 minute before,

–

5 minutes before,

–

the moment the signal was selected (up to a
maximum of two hours).

«
...
51
52
53
54
55
...
»

Содержание AC500920K



























































































Отзывы:

Нет отзывов