manualshive.com logo in svg

Hill-Rom VersaCare P3200, Руководство по обслуживанию

Поделиться
Скачать
Hill-Rom VersaCare P3200 Скачать руководство пользователя страница 117

Mechanical System 

Chapter 3: Theory of Operation 

End Panel Module 

The end panel module consists of a head panel and a foot panel. The head 
panel is a flat stationary panel vertically affixed to the base frame near the head 
end. The head panel is not weighed with the scale option. The headpanel’s 
intended functions are: 

•  To provide grip areas for caregivers to use during transport. 

•  To provide an emergency CPR board 

The head panel can be quickly removed by a caregiver for CPR or to gain 
access to the patient's head from the head end. 

The foot panel is located at the foot end. It is affixed to the foot section of the 
articulating deck in such a way that it remains perpendicular to the surface of 
the foot section. The footpanel's intended functions are: 

•

 

To support the bottoms of the patient's feet in the chair and bed modes to 
prevent foot drop. 

•  To provide a support for patients to reposition themselves. 

•  To provide grip areas for caregivers to use during transport. 

•  To keep the patient from slipping off the foot end. 

•  To deter unauthorized patient exit from the foot end. 

3 

VersaCare™ Bed Service Manual (MAN333 REV 2) 

Page 3 - 3 

Содержание VersaCare P3200




























































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды