Hill-Rom TotalCare P1830A, Руководство по обслуживанию, Страница: 45 / 92

4.5 Sleep Surface
Chapter 4: Removal, Replacement, and Adjustment Procedures
TotalCare® Bariatric Bed Service Manual (man299ra) Page 4 - 13
4
4.5 Sleep Surface
Tools required: None
Removal
1. Press the Bed Flat control to place the bed in the flat position.
2. Press the Hi-Lo Up control to raise the bed to the high position.
3. Unzip the upper ticking (A) to gain access to the fire barrier (B) (see figure
4-5 on page 4-13).
Figure 4-5. Sleep Surface
4. Remove the fire barrier (B).
5. Unsnap the snaps (D) securing the straps (E) to the foot section (F) and
mattress (C).
6. Check all surfaces of each component for staining.
7. Discard all stained foam.