Hill-Rom RESIDENT P872 Скачать руководство пользователя страница 87 | Manualshive

Страница: 87 / 178

Hill-Rom RESIDENT P872 Скачать руководство пользователя страница 87

Theory of Operation

Chapter 3: Theory of Operation

RESIDENT® Low Bed Service Manual (man259)

Page 3 - 11

3

allow the resident to control the contour functions, which are primarily comfort
settings. The outside control buttons are intended for caregiver use in setting
the sleep surface height. The lockout control for a function must be off for the
function to operate.

Figure 3-8. Siderail Function Control Buttons

Mechanical Function

The only hand-operated, mechanical functions are raising and lowering the
siderails.

When the siderails are in the up position, a spring loaded latch locks them in
place. The lock must be manually released before the siderails can be lowered.

In their lowest position, the top of the siderails are approximately even with the
top of the sleep service (based on the use of the standard mattress options
available for use on the RESIDENT® Low Bed). When lowered, the siderails
move in slightly and store against the bed frame; they do not slide under the
platform.

m259_024

«
...
85
86
87
88
89
...
»

Содержание RESIDENT P872



















































































































































































Отзывы:

Нет отзывов