Hill-Rom RESIDENT P872 Скачать руководство пользователя страница 178 | Manualshive

Страница: 178 / 178

Hill-Rom RESIDENT P872 Скачать руководство пользователя страница 178

7.6 Head Panel and Foot Panel—P4071, P4072, P4073, and P4074

Chapter 7: Accessories

Page 7 - 10

RESIDENT® Low Bed Service Manual (man259)

7.6

Head Panel and Foot Panel—P4071, P4072, P4073, and P4074

Tools required:

None

The Hearthside head panel and foot panel (P4071), Heirloom head panel and
foot panel (P4072), Artisan Post head panel and foot panel (P4073), and
Artisan Dentil head panel and foot panel (P4074) are available as accessories.

Installation

1. Align the brackets on the head panel or foot panel (A) with the mounting

posts (B) (see figure 7-3 on page 7-10).

Figure 7-3. Head Panel and Foot Panel

2. Slide the head panel or foot panel (A) downward until it is fully engaged.

Removal

Lift the head panel or foot panel (A) vertically from the mounting posts (B).

m259_055

«
...
176
177
178

Содержание RESIDENT P872



















































































































































































Отзывы:

Нет отзывов