Hill-Rom P870, Руководство пользователя

Страница: 93 / 231

2.11 Control Lockout Does Not Function Correctly
Chapter 2: Troubleshooting Procedures
Page 2 - 42 Resident
TM
LTC Bed Service Manual (man136rc)
2
5. Press the Up or Down buttons on the handset or both optional siderail
controls (if available). This creates a relay clicking sound in the control box
(on top of the hilow motor actuator).
Yes No
↓ →
If a clicking sound is heard with one control actuated but not the
other(s), go to RAP 2.13. If a relay clicking sound is not heard
when any of the controls are pressed, go to step 6.
6. The siderail control cables (A) (if available), the handset control cable (B),
and the automatic contour cable (C) are firmly connected to their
respective receptacles on the control lockout box and are in good condition
(see figure 2-32 on page 2-42).
Yes No
↓ →
Connect the cables, and replace any that are damaged.
This solves the problem.
Yes No
↓ →
Go to step 8.
Figure 2-32. Control Lockout Cable Connections
7. Go to “Final Actions—Electric Drive Model” on page 2-18.
A
A
B
C
m136_031