Hill-Rom Excel Care страница 53 Скачать руководство пользователя | Manualshive

Страница: 53 / 60

background image

CAUTION:

This device meets all requirements for electromagnetic compatibility per EN
60601-1-2. It is unlikely that the user will encounter problems with this device
because of inadequate electromagnetic immunity. However, electromagnetic
immunity is always relative, and standards are based on anticipated environments
of use. If the user notes unusual device behavior, particularly if such behavior is
intermittent and associated with nearby use of radio or TV transmitters, cell
phones, or electro-surgical equipment, this could be caused by electromagnetic-
interference. If such behavior occurs, the user should try moving the interfering
equipment further from this device.

WARNING:

Do not connect the power cord to an extension cord or multiple outlet strip. The
risk of overheating and fire may result in personal injury or property damage.

WARNING:

Do not cover the bed’s power cord with a rug or carpet. The risk of overheating
and fire may result in personal injury or property damage.

Examine the covering of the bed’s control panel, including the patient lockout features, to
make sure the covering is not cracked or damaged.

Policies and procedures must be established to train and educate your staff on the risks
associated with electric equipment. It is never prudent or necessary for persons to put any
part of their body under or between moving parts of the bed. Whenever a bed is being
cleaned or serviced, it should be unplugged from its power source, and the lockouts should
be engaged to keep the bed from accidentally operating due to the battery backup. Refer to
the Excel Care™ Bariatric Bed Service Manual (man337).

Parts and Accessories

WARNING:

Do not exceed the load capacity of the IV pole. If the IV pole is overloaded,
personal injury or equipment damage may occur.

WARNING:

Failure to correctly attach the IV pole could let it fall, resulting in personal injury or
equipment damage.

WARNING:

Uneven loading of the IV pole could let the contents fall, resulting in personal
injury or equipment damage.

WARNING:

If the IV pole is installed at the foot end of the bed, make sure the Knee Up and
Down controls are locked out. Failure to do so can result in personal injury or
equipment damage.

52

«
...
51
52
53
54
55
...
»

Содержание Excel Care





























































Отзывы:

Нет отзывов

Похожие инструкции для Excel Care

Бренд: Makerfire Страницы: 10

Бренд: Olympus Страницы: 86

Бренд: Fender Страницы: 15

Бренд: J D Squared Страницы: 18

Бренд: MacDon Страницы: 272

Бренд: MacDon Страницы: 70

Бренд: Datalogic Страницы: 48

Бренд: PageFlip Страницы: 32

Бренд: R.M. Young Страницы: 10

Martin ERA 800 Performance

Бренд: Harman Страницы: 32

Martin ERA 600 Performance

Бренд: Harman Страницы: 32

Бренд: Hardt Страницы: 22

Бренд: Sabre Страницы: 2

Бренд: Qiagen Страницы: 48

Бренд: Qiagen Страницы: 162

Бренд: Qazqa Страницы: 4

Бренд: Qlightec Страницы: 12

Бренд: Agilent Technologies Страницы: 114

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды