Hill-Rom Excel Care Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 60

Hill-Rom Excel Care Скачать руководство пользователя страница 34

Oxygen Tank Holder, E-Size (P276)

WARNING:

Do not exceed the load capacity of the oxygen tank holder. If the oxygen tank is
overloaded, personal injury or equipment damage may occur.

WARNING:

Failure to correctly attach the oxygen tank holder could let it fall, resulting in
personal injury or equipment damage.

WARNING:

Uneven loading of the oxygen tank holder could let the contents fall, resulting in
personal injury or equipment damage.

The oxygen tank holder attaches to the head end of the base frame in a vertical position.
The oxygen tank holder holds one E size oxygen tank with a regulator. The mounting
points location let the affixed oxygen tank holder pivot. The safe working load of the
oxygen tank hold is 30 lb (14 kg).

To install the oxygen tank holder, do as follows:

1. Install the mounting bar vertically into an equipment socket at either the head end or

foot end of the articulating frame.

2. If installing the oxygen tank holder at the foot end of the bed, make sure the Knee

Up/Down control is locked out.

3. Place the oxygen tank in the oxygen tank holder.

4. Tighten the holder thumbscrew to keep the oxygen tank from turning.

To remove the oxygen tank holder, do as follows:

1. Loosen the thumbscrew that holds the oxygen tank tight in the oxygen tank holder.

2. Lift the oxygen tank out of the oxygen tank holder.

3. Lift up on the oxygen tank holder, and remove it from the equipment sockets.

33

«
...
32
33
34
35
36
...
»

Содержание Excel Care





























































Отзывы:

Нет отзывов