Hill-Rom DuraStar Series, Руководство по обслуживанию

Страница: 40 / 165

DuraStar™ Fixed Height Stretcher Function Checks
Chapter 2: Troubleshooting Procedures
DuraStar™ Series Stretcher Service Manual (man268) Page 2 - 7
2
DuraStar™ Fixed Height Stretcher Function Checks
1. Initial Actions have been performed.
Yes No
↓ →
Go to “Initial Actions” on page 2-3.
Brake/Steer Function
2. Put the stretcher in the brake position. The brake pedal seats in that
position, and none of the four casters roll or rotate.
Yes No
↓ →
Go to RAP 2.1.
3. Inspect the brake pads for wear. All brake pads are serviceable.
Yes No
↓ →
Go to RAP 2.1.
4. Put the stretcher in the steer position. Only the patient’s left foot end caster
locks into a position parallel to the side of the bed, and all other casters spin
freely
.
Yes No
↓ →
Go to RAP 2.2.
5. Put the stretcher in the neutral position. The pedal seats in that position,
and all four casters rotate and roll freely.
Yes No
↓ →
Go to RAP 2.3.
Siderail Function
6. Raise and lower the siderails. The siderails go up and down without
binding and excessive force is not required to raise or lower the siderails.
Yes No
↓ →
Go to RAP 2.6.