Hill-Rom CarePorter P3000, Руководство по обслуживанию

Страница: 175 / 220

Component Handling
Chapter 6: General Procedures
Page 6 - 4 CarePorter™ Cart Service Manual (man239)
Component Handling
CAUTION:
Ensure that your hands are clean, and only handle the P.C. boards by
their edges to prevent component damage.
CAUTION:
Wear an antistatic strap when handling electronic components. Failure
to do so could result in component damage.
CAUTION:
Place the removed P.C. boards in antistatic protective bags for shipping
and storage. Equipment damage can occur.
P.C. Boards
Good handling practices must be followed when servicing P.C. boards.
Mishandling can cause damage to the P.C. boards, shorten their service life,
and result in bed malfunctions. The following rules for handling should always
be observed:
• Wear an appropriate antistatic (electrostatic discharge) strap, and ensure it
is properly grounded when working with electronics.
• Ensure that hands are clean and free of moisture or oily liquids (etc.).
• Only handle the P.C. boards by their outer edges. Do not touch the
components on the P.C. board. Finger contact with the board surface and/or
with its components can leave a deposit which will result in board (and
component) deterioration.
Place the removed P.C. boards in antistatic protective bags for shipping and
storage.