manualshive.com logo in svg

Hill-Rom CareAssist Bed P1170, Руководство пользователя

Поделиться
Скачать
Hill-Rom CareAssist Bed P1170 Скачать руководство пользователя страница 18

14

Brake and Steer Control

WARNING:

Unless transporting the patient, always set the brakes when the unit is occupied. Reconfirm that 
the brakes are set before any patient transfer. Failure to do so may result in personal injury or 
equipment damage.

The brake and steer control is located under the foot section. There are three positions: Brake, Neutral, 
and Steer. The brake position keeps the bed from moving. The neutral position allows the bed to be 
moved sideways. The steer position allows the bed to be moved in a straight line. 

When the bed is plugged into AC power and the brakes are not set, an alarm sounds until the brakes are 
set or AC power is removed.

To Activate

Head and Foot Siderails

WARNING:

Evaluate patients for entrapment risk according to facility protocol, and monitor patients 
appropriately. 

WARNING:

Evaluate patients for entrapment risk according to facility protocol, and monitor patients 
appropriately. Ensure that all siderails are fully latched when in the raised position. Failure to do 
either of these could result in serious injury or death.

NOTE:
Siderails are intended to be a reminder to the patient of the unit's edges, not a patient-restraining device. 
When appropriate, Hill-Rom recommends that medical personnel determine the proper methods 
necessary to ensure a patient remains safely in bed. 

The CareAssist™ Bed siderails have been designed for one-step operation.

Siderails in the raised position are intended to make the patient aware of the proximity of the edge of the 
sleep surface and to assist in patient entry and exit.

Brake
Using your foot,
step down on the

 

 

Neutral
Using your foot, lift the
brake/steer bar until it 
travels to the middle detent.

Steer
Using your foot, lift the
brake/steer bar to the full
up position.

Brake Position Label
Located on the base
frame near the casters.

 
brake/steer bar
until it stops.

Содержание CareAssist Bed P1170























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды