manualshive.com logo in svg

Hill-Rom 305 Manual Bed, Руководство по обслуживанию, Страница: 59 / 176

Поделиться
Скачать
Hill-Rom 305 Manual Bed Скачать руководство пользователя страница 59

4.3  Trendelenburg Control Box

Chapter 4: Removal, Replacement, and Adjustment Procedures

4

Hill-Rom® Basic Care™ Bed, Hill-Rom® 305 Manual Bed,

Page 4 - 7 

 

Hill-Rom® 405 Electric Bed Service Manual (MAN336 REV 2)

4.3

Trendelenburg Control Box

Tools required:

3 mm hex wrench

 

Needle nose pliers

Removal

SHOCK HAZARD:

Disconnect the bed from its power source. Failure to do so could cause 
injury or equipment damage.

1. Disconnect the bed from its power source.

2. Disconnect the battery cable from the control board (refer to procedure 4.7 

on page 4-16).

3. Remove the two retaining rings (A) that attach the Trendelenburg and 

Reverse Trendelenburg rods (B) to the switches (C) (see figure 4-3 on page 
4-8).

4. Remove the two screws (D) that attach the Trendelenburg control box (E) 

to the bed frame (F).

5. Remove the Trendelenburg control box (E) from the bed frame (F).

Содержание 305 Manual Bed

















































































































































































Отзывы:

Нет отзывов