Hill-Rom 20090059 Скачать руководство пользователя страница 1

Страница: 1 / 60

www.liko.com

Golvo

™

Motor for Base width Adjustment Golvo, grey

Motorpaket komplett Golvo, grå

Assembly Instruction

Monteringsanvisning

Prod. No. 20090059

3SE630216-05

2014-02-18

www.liko.com

Tools required:

5.274

2,5 mm

4 mm

Contains:

Qty:

Motor for Base with Adjustment

Motor cable Mini Fit (for Golvo 8000/8008) 1

Fits:

Golvo 7000/7007 (all models)

Golvo 8000/8008 (all models)

After mounting: The distance A & B must be the same.

Note! The cover profiles (C) must be fixed to the

middle beam (D).

Assemble the Motor in reverse order.

Connect the

cable for base motor to socket number 3.

Adjust the width almost to the outer position.

Disconnect the motor cable from the control box

Golvo 7000/7007 (all models):

NOTE

- Make sure the spare part is mounted according to the assembly instruction.

- Check all functions related to the changed spare part.

- Repairs and maintenance may only be performed by personnel authorized by Hill-Rom/Liko and using original Liko spare parts.

Содержание 20090059





























































Результаты поиска

Содержание 20090059

Отзывы:

Бренды по названию

Популярные бренды

Hill-Rom 20090059, Инструкция по сборке

Результаты поиска

Содержание 20090059

Отзывы:

Бренды по названию

Популярные бренды