
Network Camera User Manual
31
Firmware: Locate the exact path of the upgrade file.
Firmware Directory: Only the directory the upgrade file belongs to is
required.
2.
Click
Browse
to select the local upgrade file and then click
Upgrade
to start
remote upgrade.
Note:
The upgrading process will take 1 to 10 minutes. Please don't disconnect
power of the camera during the process, and the camera reboots automatically
after upgrade.
Log
Purpose:
The operation, alarm, exception and information of the camera can be stored in log
files. You can also export the log files on your demand.
Before you start:
Please configure network storage for the camera or insert a SD card in the camera.
Steps:
1.
Enter log searching interface:
Configuration
>
System
>
Maintenance
>
Log
.
Log Searching Interface
2.
Set the log search conditions to specify the search, including the Major Type,
Minor Type, Start Time and End Time.
3.
Click
Search
to search log files. The matched log files will be displayed on the
log list
interface.
Содержание UD08391B
