HIKVISION UD08391B, Руководство пользователя, Страница: 121 / 139

Network Camera User Manual
112

Record Triggered by Motion & Alarm
If you select Motion & Alarm , the video will be recorded when the motion
and alarm are triggered at the same time.
Besides configuring the recording schedule, you have to configure the settings
on the Motion Detection and Alarm Input Settings interfaces. Please refer to
Section 9.1.1
.and
Section 9.1.3
for detailed information
.

Record Triggered by Motion | Alarm
If you select Motion | Alarm , the video will be recorded when the external
alarm is triggered or the motion is detected.
Besides configuring the recording schedule, you have to configure the settings
on the Motion Detection and Alarm Input Settings interfaces. Please refer to
Section 9.1.1
.and
Section 9.1.3
for detailed information
.

Record Triggered by Events
If you select Event , the video will be recorded if any of the events is triggered.
Besides configuring the recording schedule, you have to configure the event
settings
.
5. Select the record type, and click-and-drag the mouse on the time bar to set the
record schedule.
6. Click Save to save the settings.
Configure Capture Schedule
Purpose:
You can configure the scheduled snapshot and event-triggered snapshot. The captured
picture can be stored in the local storage or network storage.
Steps:
1. Enter the Capture Settings interface: Configuration > Storage > Storage
Settings > Capture .