HIKVISION UD08391B, Руководство пользователя, Страница: 105 / 139

Network Camera User Manual
96
Scene Change Detection
3. Check the checkbox of Enable to enable the function.
4. Click-and-drag the slider to set the detection sensitivity. The sensitivity value
ranges from 1 to 100, and the higher the value is, the more easily the change of
scene can trigger the alarm.
5. Click Arming Schedule to set the arming schedule. Refer to
Task 2 Set the
Arming Schedule for Motion Detection
in
Section 9.1.1
for detailed steps
.
6. Click Linkage Method to select the linkage methods for scene change, including
Notify Surveillance Center, Send Email, Upload to FTP/Memory Card/NAS,
Trigger Channel and Trigger Alarm Output.
7. Click Save to save the settings.
Configuring Intrusion Detection
Purpose: