If the wall is cement, insert expansion bolts before
installing the camera. If the wall is wooden, use self-
tapping screws to secure the camera.
If the product does not function properly, contact your
dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.
2.1
Ceiling Mounting
Before you start:
Both wall mounting and ceiling mounting are suitable for
the dome camera. Ceiling mounting will be taken as an
example in this section. And you can take steps of ceiling
mounting as a reference for wall mounting.
Steps:
1.
Paste the drill template to the celling.
2.
Drill screw holes and the cable hole (optional) on the
ceiling according to the supplied drill template.
5
0
.3
m
m
(
1
.9
8
"
)
5
0
m
m
(
1
.9
7
"
)
2
5
.1
m
m
(0
.9
8
"
)
58 mm
(2.28" )
29 mm
(1.14" )
43.3 mm
(1.7" )
Figure 2-1
The Drill Template
Note:
Drill the cable hole (hole A) when adopting the ceiling
outlet to route the cable.
3.
Loosen the screws on the bubble of the dome camera
to remove the bubble, and the black liner.
Figure 2-2
Remove the Bubble and the Black Liner
4.
Attach the back box of camera to the ceiling and
secure them with supplied screws.
Figure 2-3
Attach the Back Box/Base Plate