Thermal Driving Assistance System
|
User Manual
19
4
System Setup
Before any further use of the system, you should firstly adjust
the view, the hardware, and image, etc.
4.1
System Correction
Purpose:
To ensure the proper working of Smart function, you should
correct the system first.
Step:
1.
Hold the Menu button to enter the menu.
2.
Set the
Mounting Height
,
Elevation Angle
, and the
Distance from Vehicle Left
, and
Vehicle Width
.
3.
Check whether the lane meets the lane in the display. The
right scene is as follow.
Right Scene
-
If the lane is above the lane in the display, as in the
figure below. Decrease the
Elevation Angle
.