HIKVISION TCP440-DB Series, Руководство пользователя, Страница: 47 / 56

Chapter 11 Alarm Configuration
This section explains how to set the device to respond to alarm events, including motion detection
and exceptions. These events can trigger the linkage methods, such as notifying the surveillance
center.
11.1 Set Motion Detection
Motion detection detects the moving objects in the set surveillance area, and a series of actions
can be taken when the alarm is triggered.
Steps
1. Go to Configuration → Device Configuration → Exception → Motion Detection .
2. Check Enable Motion Detection and Enable Dynamic Analysis.
3. Set the motion detection area.
1) Click Draw Area.
2) Drag the mouse on the live view to draw a motion detection area.
3) Click Stop Drawing to complete the current drawing.
4) Optional: Repeat the steps to draw more areas.
5) Optional: Click Clear All to clear all the areas.
6) Adjust Sensitivity of the motion detection.
Figure 11-1 Set Motion Detection
4. Set the arming schedule for the motion detection.
1) Click Edit.
2) Select a day to set the arming schedule.
3) Set the start time and end time of the periods.
Parking Camera User Manual
36