HIKVISION TCP440-DB Series, Руководство пользователя, Страница: 41 / 56

You can set the device IPv4 parameters manually. Enter IPv4 Address, IPv4 Subnet Mask, and
IPv4 Default Gateway.
IPv6
Three IPv6 modes are available.
Route Announcement
The IPv6 address is generated by combining the route announcement and the device Mac
address.
Note
Route announcement mode requires the support from the router that the device is connected
to.
Auto-Obtain
The IPv6 address is assigned by the server, router, or gateway.
Manual
Enter IPv6 Address, IPv6 Subnet Mask, and IPv6 Default Gateway. Consult the network
administrator for required information.
MTU
It stands for maximum transmission unit. It is the size of the largest protocol data unit that can
be communicated in a single network layer transaction.
The valid value range of MTU is 1280 to 1500.
Multicast Address
Multicast is group communication where data transmission is addressed to a group of
destination devices simultaneously. After setting the IP address of the multicast host, you can
send the source data efficiently to multiple receivers.
DNS
It stands for domain name server. It is required if you need to visit the device with domain
name. And it is also required for some applications (e.g., sending email). Set Preferred DNS
Server properly if needed.
9.2 Connect to EHome Platform
EHome is a platform access protocol. The device can be remotely accessed via EHome platform.
Before You Start
• Create the device ID on EHome platform.
• Ensure the device can communicate with the platform normally.
Steps
1. Go to Configuration → Device Configuration → System Configuration → EHOME .
Parking Camera User Manual
30