HIKVISION TandemVu DS-2SE4C215MWG-E/12(F0), Руководство пользователя

Страница: 94 / 113

Wireless
Connection
Input the Wi-Fi password that your mobile phone has connected to, and
tap Next to start the Wi-Fi connection process. (Locate the camera within 3
meters from the router when setting up the Wi-Fi.)
Wired
Connection
Connect the camera to the router with a network cable and tap Connected
in the result interface.
Note
The router should be the same one which your mobile phone has connected to.
8. Tap Add in the next interface to finish adding.
For detailed information, refer to the user manual of the Hik-Connect app.
10.8 Set ISUP
When the device is registered on ISUP platform (formerly called Ehome), you can visit and manage
the device, transmit data, and forward alarm information over public network.
Steps
1. Go to Configuration → Network → Advanced Settings → Platform Access .
2. Select ISUP as the platform access mode.
3. Select Enable.
4. Select a protocol version and input related parameters.
5. Click Save.
Register status turns to Online when the function is correctly set.
10.9 Set Open Network Video Interface
If you need to access the device through Open Network Video Interface protocol, you can
configure the user settings to enhance the network security.
Steps
1. Go to Configuration → Network → Advanced Settings → Integration Protocol .
2. Check Enable Open Network Video Interface.
3. Click Add to configure the Open Network Video Interface user.
Delete Delete the selected Open Network Video Interface user.
Modify Modify the selected Open Network Video Interface user.
4. Click Save.
5. Optional: Repeat the steps above to add more Open Network Video Interface users.
TandemVu PTZ Camera User Manual
82