Installation
1
Device Wiring (Normal)
2
DS-K1T
331 Series Face Recognition Terminal
Quick Start Guide
UD15536B-A
Installation Environment:
Avoid backlight, direct sunlight, and indirect sunlight.
For better recognition, there should be light source in or near the installation environment.
Appearance and Dimension:
1
2
Notes:
The installation height here is the recommended height. You can change it according to your actual needs.
For easy installation, drill holes on mounting surface according to the supplied mounting template.
Drill holes on the wall or other surface according to the mounting template and install the gang box.
Use two supplied screws (SC-KM4x25-SUS or KA4×22-SUS) to secure the mounting plate on the
gang box.
Route the cables through the cable hole of the mounting plate, and connect the terminals with the
external devices' cables.
Align the device with the mounting plate and hang the device on the mounting plate.
Use one supplied screw to secure the device and the mounting plate.
Installation with Gang Box:
Base Mounting:
Device
Mounting
Plate
Gang
Box
Wall
3
4
Route the cables through the cable hole of the bracket, and connect the terminals
with external devices' cables.
Align the device two holes with the two buckles on the bracket.
Hang the device on the bracket and make sure the buckle in the middle of the bracket
is inserted in the groove on the device back.
Place the assembled device and bracket on the desk or other flats.
1
2
3
4
Direct Sunlight Direct Sunlight
through Window
Backlight
Indirect Sunlight
through Window
Close to Light
2
3
4
1
Screen
Camera
White Light
Camera
microUSB
Interface
Tamper
Network Interface
Wiring Terminal
Debugging Port
11
0 mm
120 mm
23 mm
Before you start:
According to the baseline on the mounting template, stick the mounting template on the wall or other
surface, 1.45 meters higher than the ground.
Note:
Make sure the output of external power supply fulfils LPS.
Steps:
Cable Hole
Network Interface
GND
GND
BTN
GND
C7
C6
C1
C2
C3
C4
C5
B1
B2
B3
Black
Orange
Yellow
Red
Black
Blue
Black
Green
White
Grey
Purple
Black
-
+
RS-485
Power Input
Door Lock
Group B
Group C
Power
Exit Button
Door
Contact
(Sensor)
Electric Dropbolt
Electric Strike
Note:
The figures are for reference only.
© 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its affiliates
(hereinafter referred to as “Hikvision”), and it cannot be reproduced, changed, translated, or
distributed, partially or wholly, by any means, without the prior written permission of Hikvision.
Unless otherwise expressly stated herein, Hikvision does not make any warranties, guarantees or
representations, express or implied, regarding to the Manual, any information contained herein.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts, images and
all other information hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvi
-
sion.com/).
Please use this Manual with the guidance and assistance of professionals trained in supporting the
Product.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of Hikvision in various
jurisdictions.
Other trademarks and logos mentioned are the properties of their respective owners.
LEGAL DISCLAIMER
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND
“WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A
PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT
WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT
LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS,
AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT
RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF
HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
Data Protection
During the use of device, personal data will be collected, stored and processed. To protect data,
the development of Hikvision devices incorporates privacy by design principles. For example, for
device with facial recognition features, biometrics data is stored in your device with encryption
method; for fingerprint device, only fingerprint template will be saved, which is impossible to
reconstruct a fingerprint image.
As data controller, you are advised to collect, store, process and transfer data in accordance with
the applicable data protection laws and regulations, including without limitation, conducting
security controls to safeguard personal data, such as, implementing reasonable administrative and
physical security controls, conduct periodic reviews and assessments of the effectiveness of your
security controls.
Notes:
The power input should be 12 VDC, 1.5 A, 18 W.
Do not wire the device to the electric supply directly.
(NC)
(COM)
(NO)
+54 9 341 6799822
+54 9 341 4577532
+54 9 341 6708000
rosarioseguridadok
Rosario Seguridad
https://www.facebook.com/groups/591852618012744/
Rosario Seguridad
+54 9 341 6591429
Avenida Presidente Perón 3998 - Rosario - Santa Fe - Argentina
+54 9 341 6799822
+54 9 341 4577532
+54 9 341 6708000
rosarioseguridadok
Rosario Seguridad
https://www.facebook.com/groups/591852618012744/
Rosario Seguridad
+54 9 341 6591429
Grupo Instaladores