HIKVISION RA4 Series Скачать руководство пользователя страница 81

Страница: 81 / 102

Camera Management

Configuring Video Tampering Detection

Video tampering detection can be used to recognize if an area of a camera is purposely
covered and to respond accordingly.

To configure video tampering detection:

Enter the Video Tampering Detection menu, shown in Figure 51 by going to
Main Menu > Camera Setup > Video Tampering Detection.

Figure 51. Video Tampering Detection Menu

Select the camera to setup video tampering detection in using the camera drop

down menu on the upper left of the menu. If all cameras are to be configured
with the same settings, select

All Cameras

from the list

Click

Enable Video Tampering Detection

Adjust the

Sensitivity

for video tampering detection.

Using the mouse, select the region on the preview screen for where you would

like to enable video tampering detection on. Press the Clear button to clear
region.

Select

Actions

to take if video tampering is detected. More than one action can

be selected per channel. These actions include:

•

Sound Audio Warning:

DVR will sound an audio warning if tampering is

detected.

•

Pop-up Image on Monitor:

DVR will show the corresponding channel

that is associated with the tampered channel.

Содержание RA4 Series







































































































Результаты поиска

Содержание RA4 Series

Отзывы:

HIKVISION RA4 Series, Руководство пользователя, Страница: 81 / 102

Результаты поиска

Содержание RA4 Series

Отзывы: