HIKVISION PTZ Ultra Series, Руководство пользователя, Страница: 38 / 139

Figure 4-12 Patterns Settings Interface
3. Click to enable recording the panning, tilting and zooming actions.
4. Use the PTZ control buttons to move the lens to the desired position after the information of
PROGRAM PATTERN REMAINNING MEMORY (%) is displayed on the screen.

Pan the camera to the right or left.

Tilt the camera up or down.

Zoom in or out.

Refocus the lens.
5. Click to save all the pattern settings.

Buttons on the Patterns interface:
Buttons Description
Start the selected patrol/pattern.
Stop current patrol/pattern.
Set the selected preset/patrol.
Delete the selected preset/patrol/pattern.
Start recording a pattern.
Stop recording the pattern.
Notes:
 These 4 patterns can be operated separately and with no priority level.
 When configuring and calling the pattern, proportional pan is valid; the limit stops and auto
flip will be invalid; and the 3D positioning operation is not supported.
4.5.7 Configuring Wiper
Purpose:
You can set the working mode of the wiper in Configuration > PTZ > Wiper.
Note:
The function is only supported by certain camera models.
Steps:
1.
Enter the Wiper Configuration interface:
Configuration > PTZ > Wiper