HIKVISION PanoVu DS-2DP1618ZIXS-DE/440/T2, Руководство пользователя, Страница: 92 / 134

User Manual of PanoVu Series Network Camera
85
3. The event triggered and park action related PTZ movement will be locked for 180 seconds after you
enter the unattended baggage detection interface. Optionally, you can click the
button to manually activate the movement, or lock the movement when the button turns to
by clicking it.
4. Select the region from the dropdown list for detection settings.
5. Click the button to start the region drawing.
6. Click on the live video to specify the four vertexes of the detection region, and right click to
complete drawing.
Repeat the step to configure other regions. Up to 4 regions can be set. You can click the
button to clear all pre-defined regions.
7. Configure the parameters for each defense region separately.

Threshold Level: If you set the value as 5, alarm is triggered immediately after the object
entering the region.

Sensitivity Level: The value of the sensitivity defines the size of the object which can trigger the
alarm, when the sensitivity is high, a very small object can trigger the alarm.
8. Click tab to enter the arming schedule setting interface. The time schedule
configuration is the same as the settings of the arming schedule for motion detection. Refer to
Section 6.1.1 Configuring Motion Detection for more details.
9. Click tab to select the linkage method taken for the unattended baggage alarm,
Notify surveillance center, send email, upload to FTP, trigger channel, smart tracking and trigger
alarm output are selectable. Refer to Section 6.1.1 Configuring Motion Detection for more details.
10. Click button to save the settings.
6.2.7 Configuring Object Removal Detection
Purpose:
Object removal detection function detects objects which remove in a pre-defined virtual region, and
some certain actions can be taken when the alarm is triggered.