Helmet Camera Quick Start Guide
13
Figure 2-6
Lock Card Socket
Step 6
Install the battery back. Refer to step 2 of 2.1 Change Battery.
Step 7
Install the battery cover back. Refer to step 3 of 2.1 Change Battery.
2.3 Install Device to Helmet
The device is equipped with two hook fasteners and two loop fasteners for helmet installation. Two
fasteners have been stuck on the bottom of the device after leaving factory. Stick the other two
fasteners on the helmet, and stick the device to the two fasteners on the helmet to fix it, as shown
in Figure 2-7.
Figure 2-7
Install Device to Helmet
