Title:
Face Terminal Wiegand Output Configuration Version:
v1.0
Date:
4/6/201
9
Product:
Access Conrtol
Page:
1 of 4
Face Terminal Wiegand Output Configuration
Instructions
Face terminals, such as K1T604, 605, 606, 607 support Wiegand output mode. In this output
mode, face terminal will send person’s card number after this person authenticate
successfully on the terminal. So you can connect face terminal to access controller or other
face terminal to work as a reader.
Steps
1.
Wiring
Connect face terminal’s Wiegand to controller or another access control terminal:
2.
Power on face terminal and controller.
3.
Change face terminal’s Wiegand mode to output:
We can do this step either on ivms4200 or device local interface. Choose direction
as
output
and choose Wiegand 26 or 34 according to requirement.
Local Interface
