HIKVISION K1108AEK Series, Руководство пользователя

Страница: 14 / 19

No. Description DIP Switch Status
Note
• For EM card reader, the DIP
switch is reserved.
• For Desfire card reader, the
DIP switch is for reading
card No.
recognition function, disable
door open via NFC card.
6 Wiegand protocol or RS-485
protocol.
1: Wiegand protocol
0: RS-485 protocol
7 Wiegand Protocol (available
when No. 6 is 1)
1: Wiegand protocol of 26-bit;
0: Wiegand protocol of 34-bit.
8 Matched Resistance (available
for RS-485 protocol)
1: Enable
0: Disable
3.3 Wiring Cables
Wire the cables between controller and card reader, thus to establish the communication between
them.
3.3.1 Description of Cable
The description of 10 cables is shown below.
Table 3-2 Description of Cable
Color Description
Orange Wiegand ERR (Available for Wiegand Protocol)
Brown Wiegand OK (Available for Wiegand Protocol)
White Wiegand W1 (Available for Wiegand Protocol)
Green Wiegand W0 (Available for Wiegand Protocol)
Blue RS-485-
Yellow RS-485+
Red PWR (+12 VDC)
Black GND
Card Reader User Manual
5