User Manual of iDS-TP40-16B Traffic Incident Detection Server
53
Step 7
Click Save to save the settings.
8.6 Configure Scene Patrol
Purpose
You can configure the scene patrol schedule of each day in a week. Then the configured scene will
be enabled according to the scene schedule.
Step 1
Go to Camera Configuration > Scene Patrol.
Figure 8-24
Scene Patrol Configuration
Step 2
Select the channel.
Step 3
Check Enable Patrol Schedule.
Step 4
Click a day in a week and configure the schedule. Up to 16 periods can be configured for a
day.
1)
Click
to set the start time and end time.
2)
Click Configuration to configure the auto-switch scene.
a)
Click Add New Rule. Up to 12 rules can be added for one period.
b)
Select the Scene.
c)
Set the Dwell Time.
d)
(Optional) Click
or
to adjust the sequence.
