HIKVISION iDS-TCS800-CI, Руководство пользователя, Страница: 29 / 74

Figure 4-5 Set License Plate Recognition Parameters
2. Select License Plate Direction.
-
Select Front LPR when license plates of vehicles from the approaching direction need to be
recognized.
-
Select Rear LPR when license plates of vehicles from the leaving direction need to be
recognized.
3. Set Country/Region according to the actual needs.
4. Click Save.
4.3.2 Set Supplement Light Parameters
Supplement light can enhance the image stabilization and adjust the brightness and color
temperature. You can use supplement light to supplement light at night or when the light is dim.
Steps
Note
●
Only when the solid light is connected, can the set parameters take effect.
●
The supported parameters vary with different models. The actual device prevails.
1. Go to Configuration → Device Configuration → Capture Parameters → Supplement Light
Parameters .
Figure 4-6 Set Supplement Light Parameters
2. Select the I/O.
All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual
19