HIKVISION iDS-TCS800-CI, Руководство пользователя

Страница: 28 / 74

5) Click Draw Virtual Coil A to draw the virtual coil area.
Note
●
Click the left button of the mouse to locate the vertexes of the virtual coil area on the live
view image, and click the right button of the mouse to finish the drawing.
●
It is recommended to draw the virtual coil A at the position the distance from which to the
image lower edge is the length of two vehicles.
6) Click OK.
Figure 4-4 Draw Lane Lines and Virtual Coil Areas
8. Click Save.
4.3 Set Capture Parameters
4.3.1 Set License Plate Recognition Parameters
When there are vehicles of different types passing from different directions, set the license plate
recognition parameters.
Steps
1. Go to Configuration → Device Configuration → Capture Parameters → LPR Parameters .
All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual
18