HIKVISION iDS-TCS800-CI, Руководство пользователя

Страница: 15 / 74

Chapter 3 Radar Detection
Radar is used to detect the target and link the capture. Set radar detection parameters before
capturing vehicle pictures.
Note
The function varies with different models. The actual device prevails.
3.1 Set Detection Parameters
Set radar detection parameters before capturing vehicle pictures.
Steps
1. Click Radar.
Figure 3-1 Set Radar Detection Parameters
2. View the radar information.
Radar Status
The current radar status. The radar can be normally used in normal status. If the radar is in
upgrading status, do not reboot the device. Refresh the interface every one minute, and the
status can be restored to normal.
Software Version
The software version of the radar.
3. Click Wizard on the upper right corner of the interface and follow the wizard to set the
parameters.
1) Set Number of Lane and the width of each lane.
2) Set Scene Mode according to the actual condition.
All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual
5