HIKVISION iDS-TCM403-EIR/0411, Руководство пользователя, Страница: 70 / 87

9.6 Set Email
When the email is enabled and set, the device will send an email notification to all designated
receivers if an alarm event is detected.
Before You Start
Set the DNS server before using the email function. Go to Configuration → Network → Network
Parameters → Network Interface for DNS settings.
Steps
1. Go to Configuration → Network → Data Connection → Email .
Figure 9-5 Set Email
2. Set email parameters.
1) Enter the sender's email information, including Sender, Sender's Address, SMTP Server, and
SMTP Port.
2) Select Email Encryption.
SSL
Emails are sent after encrypted by SSL. The SMTP port should be set as 465.
TLS
Emails are sent after encrypted by TLS. The SMTP port should be set as 465.
Radar-Assisted Smart Monitoring Camera User Manual
60