
2. Set Brightness of the solid light.
3. Set the solid light output mode.
-
Check Enable Solid Light by Auto Brightness Detection when you want the solid light to be
controlled by detecting the surroundings brightness automatically. Set the brightness
threshold. The higher the threshold is, the harder the solid light can be enabled.
-
Check Enable Solid Light by Time when you want the solid light to be enabled during a fixed
time period. Set the start time and end time.
Note
Enabling solid light by brightness and time are conflicted with each other. You can only enable
one function.
4. Optional: Check other I/O to copy the same parameters.
5. Click Save.
2.2.2 Set Capture Overlay
If you want to overlay information on the captured pictures, set capture overlay.
Steps
1. Go to Configuration → Device Configuration → Text Overlay → Capture Overlay
Configuration .
2. Check Text Overlay on Capture.
Figure 2-4 Set Capture Overlay
3. Set the percentage, front size, color, overlay position, etc.
Percentage
It is the percentage that the overlaid information occupies on the picture. For example, if you
set the percentage to 50, the overlaid information in a row will occupy up to half of the
image width, and the excess content will be overlaid from a new line.
Overlay Number to Zeroize
Network Traffic Camera (for Traffic Flow Camera) User Manual
7
Содержание IDS-TCD402-BR
Страница 1: ...Network Traffic Camera for Traffic Flow Camera User Manual...
Страница 57: ...UD23096B...