Network Video Recorder User Manual
181
•
NO-IP:
Enter the account information in the corresponding fields. Refer to the DynDNS
settings.
1)
Enter
Server Address
for NO-IP.
2)
In the
Device Domain Name
text field, enter the domain obtained from the NO-IP
website (www.no-ip.com).
3)
Enter the
User Name
and
Password
registered in the NO-IP website.
Figure 13-5
NO-IP Settings Interface
Step 5
Click the
Apply
button to save and exit the interface.
13.2.3 Configuring NTP Server
Purpose:
A Network Time Protocol (NTP) Server can be configured on your NVR to ensure the accuracy of
system date/time.
Step 1
Go to
Menu
>
Configuration
>
Network
.
Step 2
Select the
NTP
tab to enter the NTP Settings interface, as shown in Figure 13-6.
Figure 13-6
NTP Settings Interface
Step 3
Check the
Enable NTP
checkbox to enable this feature.
Step 4
Configure the following NTP settings:
Interval:
Time interval between the two synchronizing actions with NTP server. The unit is
minute.
NTP Server:
IP address of NTP server.
NTP Port:
Port of NTP server.
Step 5
Click the
Apply
button to save and exit the interface.
Содержание iDS-9632NXI-I8/16S
