HIKVISION iDS-9632NXI-I8/16S Скачать руководство пользователя страница 82

Страница: 82 / 273

Network Video Recorder User Manual

Figure 6-16

Alarm Settings

Choose the alarm triggered recording channel.

Check the checkbox

to select channel.

Click

Apply

to save settings.

Click

to back to the upper level menu.

Repeat the above steps to configure other alarm input parameters.

If the settings can also be applied to other alarm inputs, click

Copy

and choose the alarm input

number.

Figure 6-17

Copy Alarm Input

Step 3

Edit the Alarm triggered record in the Record/Capture Schedule setting interface. For the
detailed information of schedule configuration, see

Chapter Configuring Recording and

Capture

Schedule

Содержание iDS-9632NXI-I8/16S


















































































































































































































































































Результаты поиска

Содержание iDS-9632NXI-I8/16S

Отзывы:

HIKVISION iDS-9632NXI-I8/16S, Руководство пользователя, Страница: 82 / 273

Результаты поиска

Содержание iDS-9632NXI-I8/16S

Отзывы: