HIKVISION iDS-9632NXI-I8/16S Скачать руководство пользователя страница 68

Страница: 68 / 273

Network Video Recorder User Manual

Step 3

There are 3 one-touch park types selectable, click the corresponding button to activate the
park action.

Park (Quick Patrol):

The dome starts patrol from the predefined preset 1 to preset 32 in

order after the park time. The undefined preset will be skipped.

Park (Patrol 1):

The dome starts move according to the predefined patrol 1 path after the

park time.

Park (Preset 1):

The dome moves to the predefined preset 1 location after the park time.

The park time can only be set through the speed dome configuration interface, by default the
value is 5s.

Step 4

Click the button again to inactivate it.

Содержание iDS-9632NXI-I8/16S


















































































































































































































































































Результаты поиска

Содержание iDS-9632NXI-I8/16S

Отзывы:

HIKVISION iDS-9632NXI-I8/16S, Руководство пользователя, Страница: 68 / 273

Результаты поиска

Содержание iDS-9632NXI-I8/16S

Отзывы: