ATM Digital Video Recorder User Manual
170
Figure 11-10
Custom Protocol Settings-Data Package
Step 2
Select the
Data Format
and then set the
Start Tag
for the data package.
Step 3
Select the
Data Format
and then set the
End Tag
for the data package.
Step 4
(Optional) Check the checkbox of
Enable Filter
, select the
Data Format
, input the
Content
and set the
Content Position
to filter the specified contents.
Step 5
Click
Apply
to save the new settings and click
OK
to exit.
2 types of data format is selectable:
ASCII
and
HEX
. The start/end tag of the data package and the
content to be filtered should be set in the selected data format.
11.5.2 Configuring Transaction Information Settings
Purpose
The device can analyze the transaction information which is contained in the captured message,
including the card No., transaction behaviour, transaction amount and serial No.
Step 1
Click the
Transaction Information
tab to enter the Transaction Information Settings
interface.
