manualshive.com logo in svg

HIKVISION iDS-7200AHQHI-M Series, Руководство пользователя

Поделиться
Скачать
HIKVISION iDS-7200AHQHI-M Series Скачать руководство пользователя страница 63

4.3.12 PIR Alarm

A PIR (Passive Infrared) alarm is triggered when an intruder moves within the detector vision field.

The heat energy dissipated by a person or any other warm blooded creature such as dogs, cats,

etc., can be detected.
Steps

1. Go to System → Event → Smart Event .

2. Click PIR Alarm.

Figure 4-16 PIR Alarm

3. Select a camera to configure.

4. Check PIR Alarm.

5. Optional: Check Save VCA Picture to save the captured of PIR alarm pictures.

6. Set the arming schedule.Refer to Configure Arming Schedule .

7. Set the linkage actions. Refer to Configure Linkage Actions .

8. Click Apply.

4.3.13 Target Detection

In live view mode, the target detection function can achieve smart detection, facial detection,

vehicle detection, and human body detection during the last 5 seconds and the following 10

seconds.
Steps

1. In Live View mode, click Target Detection to enter the target detection interface.

ATM Digital Video Recorder User Manual

48

Содержание iDS-7200AHQHI-M Series

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды