HIKVISION iDS-7200AHQHI-M Series, Руководство пользователя

Страница: 51 / 112

1) Select a shield region in Select Shield Region.
2) Click Draw Shield Region.
3) Click on the live view image to draw points of the region. You can click Clear Prev. Point to
clear the point that was previously drawn.
4) Click Close and the system will close the region automatically.
10. Click of the selected rule to set alarm response actions. Refer to Configure Linkage Actions
and Configure Arming Schedule for details.
11. Click Apply.
4.3 VCA Event Alarm
The device supports receiving VCA detections sent by connected IP cameras. Enable and configure
VCA detection on the IP camera settings interface first.
Note
• VCA detections must be supported by the connected IP camera.
• Refer to the network camera user manual for detailed VCA detection instructions.
4.3.1 Facial Detection
The facial detection detects the face appearing in the surveillance scene. Linkage actions can be
triggered when a human face is detected.
Steps
1. Go to System → Event → Smart Event .
2. Click Face Detection.
ATM Digital Video Recorder User Manual
36