HIKVISION iDS-7200AHQHI-M Series, Руководство пользователя

Страница: 49 / 112

It will alarm if the selected rule type continues for the configured duration. For Operation
Timeout, it ranges from 4 to 6000 seconds. For Sticking Scrip and Installing Scanner, it
ranges from 4 to 60 seconds.
Alarm Duration
Alarm duration after the selected type is triggered.
4) Click OK.
Note
Rules of different types can be enabled together for the panel mode.
9. Draw the rule region.
Human Entrance Click Draw Entrance Region to draw the region.
Operation
Timeout
Click Draw Entrance Region, Draw Rectangular Frame, Draw Polygon,
or Full Screen to draw the region.
Sticking Scrip Click Draw Entrance Region, Draw Rectangular Frame, Draw Polygon,
or Full Screen to draw the region.
Installing Scanner Click Draw Entrance Region, Draw Rectangular Frame, Draw Polygon,
or Full Screen to draw the region.
10. Click of the selected rule to set alarm response actions. Refer to Configure Linkage Actions
and Configure Arming Schedule for details.
11. Optional: Set the shield region. The shield region is used to shield environment interferences
or other influences which may cause false alarms.
1)Select a shield region in Select Shield Region.
2)Click Draw Shield Region.
3)Click on the live view image to draw points of the region. You can click Clear Prev. Point to
clear the point that was previously drawn.
4)Click Close and the system will close the region automatically.
12. Click Apply.
4.2.2 Human Face Mode
Human face mode supports the following smart ATM protection rule types: normal human face,
abnormal human face, multiple human faces, wearing sunglasses, and using mobile phone. Only
one rule can be set for the mode, the rule can contain one or more ATM protection rule types. You
can set the alarm response actions once the configured rule is triggered.
Steps
1. Go to System → Event → Smart ATM Event .
ATM Digital Video Recorder User Manual
34