
Network Traffic Speed Dome
·
Quick Start Guide
13
6.
Secure ① with the ③ in clockwise direction.
2.6
Installation of Water-proof Tape
Purpose:
If the camera is installed outdoor, you can use supplied water-proof tape to protect
cable connectors and unused cables after the camera is secured on the installation
surface.
Steps:
1.
Tear off the yellow release paper on the back of the water-proof tape.
2.
Stretch the water-proof tape to reach twice the initial length.
Stretch
Stretch
Initial Length
Waterproof Tape Length After Stretching
Figure 2-16
Stretch the Water-proof Tape
3.
Wrap the water-proof tape around the cable connector tightly as the figure below.
Cable Connector
Figure 2-17
Wrap the Water-proof Tape
Note:
Make sure that all naked wires are all firmly wrapped in the water-proof tape.