User Manual of Parking Camera
57
(2)
Choose the day you want to set the arming schedule.
(3)
Click
to set the time period for the arming schedule.
(4)
(Optional) After you set the arming schedule, you can copy the schedule to
other days.
(5)
Click
OK
to save the settings.
Note:
The time of each period cannot be overlapped. Up to 8 periods can be
configured for each day.
Figure 7-32
Arming Time Schedule
3.
Set the Alarm Actions for Motion Detection.
Check the checkbox to select the linkage method. Notify surveillance center, send
email, upload to FTP, trigger channel and trigger alarm output are selectable. You can
specify the linkage method when an event occurs.
Figure 7-33
Linkage Method
Notify Surveillance Center
Send an exception or alarm signal to remote management software when an event
occurs.
7.6.2
Handling Exception
The exception type can be HDD full, HDD error, network disconnected, IP address
conflicted and illegal login to the cameras.
Steps:
1.
Enter the Exception Settings interface:
