User Manual of Parking Camera
20
Chapter 5
Wi-Fi Settings
Purpose:
By connecting to the wireless network, you don’t need to use cable of any kind for
network connection, which is very convenient for the actual surveillance application.
Note:
This chapter is only applicable for the cameras with the built-in Wi-Fi module.
5.1
Configuring Wi-Fi Connection in Manage and
Ad-hoc Modes
Before you start:
A wireless network must be configured.
Wireless Connection in Manage Mode
Steps:
1.
Enter the Wi-Fi configuration interface.
Configuration> Advanced Configuration> Network> Wi-Fi
Figure 5-1
Wireless Network List
2.
Click
Search
to search the online wireless connections.
3.
Click to choose a wireless connection on the list.
Figure 5-2
Wi-Fi Setting- Manage Mode
4.
Check the checkbox to select the
Network mode
as
Manage,
and the
Security
mode
of the network is automatically shown when you select the wireless
network, please do not change it manually.
Note:
These parameters are exactly identical with those of the router.
5.
Enter the key to connect the wireless network. The key should be that of the
wireless network connection you set on the router.
Wireless Connection in Ad-hoc Mode
