manualshive.com logo in svg

HIKVISION DS-PHA20-M, Руководство пользователя, Страница: 84 / 127

Поделиться
Скачать
HIKVISION DS-PHA20-M Скачать руководство пользователя страница 84

Enable the function and the zone will be bypassed. No alarm will be received while the zone

is bypassed.

Link Camera

You can link the zone to cameras. When an alarm is triggered, you can monitor the zone via

the linked cameras.

Stay/Away

If this option is Enabled the zone will be auto bypassed when the alarm system is stay armed.

To re-enable the zone deselect the option.

Enable Silent Zone

Enable the function and no sounder will be triggered if an event or alarm occurs.

4.3.12 Set Arming/Disarming Schedule

Set the arming/disarming schedule to arm/disarm a particular zone automatically.
On the device list page, tap the security control panel and then log in to the device (if required) to

enter the control panel page.
Tap   → Area Management and select a area, or tap   on the Parition page to enter the Settings

page.
Enable the auto arm/disarm function and set the auto arm time/auto disarm time. You can also set

the late to disarm time, entry delay time, exit delay time, sounder delay time, weekend exception

and excepted holiday.

Hybrid Security Control Panel User Manual

76

Содержание DS-PHA20-M
































































































































Отзывы:

Нет отзывов